Due to the impact from the low trough of storm No. 2, many places show heavy rain and thunderstorms. Rainfall measured from 5.0 to 20.0mm, the highest is 30.6 mm.
|Up to 15h on 16/7, all fishing facilities in the area have entered shelter safe storm |
To actively respond to the storm No.2, Thanh Hoa province has asked localities to prepare a plan to evacuate people living in three key areas. Of which there are 57,801 households / 247,867 near the river mouth. The river bank area is 36,294 households / 140,691 people; The risk of flooding of pipes, flash floods and landslides is 7,646 households / 32,576 people.
Previously, Thanh Hoa People's Committee also sent urgent requests to the units assigned to focus closely monitoring the development of storms and floods to timely inform and inform the people to actively develop Explain the prevention and response measures . At the same time, urgently completing key tasks (forbid boats to sail, organizing guidance anchor boats at shelters, organizing relocation, anchoring cages for aquaculture to ensure safety Absolutely not let people stay on vehicles, cages ...) before 17h on July 16.
Particularly in mountainous districts, high risk areas of landslides, estuaries and coastal areas must be ready when evacuation orders are issued. Besides, it is necessary to examine in detail on option 4 in place, focusing on food, necessities and means of rescue in case of long-term splitting.
|To actively coping with typhoon No. 2, Thanh Hoa province has asked localities to plan evacuate people in dangerous areas |
In Thanh Hoa, there are 610 reservoirs and 1,023 dams that have been inspected, 121 unconfined reservoirs and 624 dams have not been invested, upgraded or repaired.
According to Vietnam Agriculture Newspaper
Using a SqlConnection Object to Connect to a SQL Server Database phần 2
The output from this program is as follows: count = 1 Milliseconds = 101 mySqlConnection.State = Open count = 2 Milliseconds = 0 mySqlConnection.State = Open count = 3 Milliseconds = 0 mySqlConnection.State = Open count = 4 Milliseconds
The output from this program is as...
Xem chi tiết
Chia sẻ bài báo này với bạn bè.